이더리움

Klaytn provides wrapped transaction types to support Ethereum compatibility. Ethereum transaction types in Klaytn have the same attributes and RLP encoding schemes with Ethereum's design except for the single-byte type delimiter called EthereumTxTypeEnvelope. Therefore, users can successfully deploy transactions generated by Ethereum development tools on Klaytn. The type delimiter is also omitted when users use eth namespace APIs, so they can use Klaytn just as if they were using Ethereum. Using klay namespace APIs, users can deploy and retrieve Ethereum formatted transactions as a type of Klaytn transactions without getting confused with the existing Klaytn transaction types.
EthereumTxTypeEnvelope
EthereumTxTypeEnvelope is a single-byte prefix for raw transactions that denotes Ethereum transaction types. Ethereum has adopted an extendable transaction type scheme from EIP-2718 and it uses a type numbering system that conflicts with Klaytn's. To resolve the conflict between two different transaction type schemes, Klaytn has introduced EthereumTxTypeEnvelope which allows for separation and expansion for future Ethereum transaction types.
EthereumTxTypeEnvelope is an additional type delimiter and used only for raw transactions and type numbering. It is not used for transaction hash or signature hash. For that purpose, EthereumTransactionType as defined in EIPs is used.
EthereumTxTypeEnvelope: 0x78
TxHashRLP : EthereumTransactionType || TransactionPayload
RawTransaction : EthereumTxTypeEnvelope || EthereumTransactionType || TransactionPayload
TxTypeEthereumAccessList
TxTypeEthereumAccessList represents a type of Ethereum transaction specified in EIP-2930. This transactions type contains an access list, a list of addresses and storage keys that the transaction is supposed to access. Since this transaction type exists to support compatibility, it only works with EOAs associated with [AccountKeyLegacy]. EOAs associated with other account key types should use other transaction types such as TxTypeValueTransfer, TxTypeSmartContractExecution, and so on. This transaction type can create accounts, transfer tokens, deploy/execute smart contracts or a mix of the aforementioned.
NOTE: Klaytn networks can process this transaction type after the EthTxTypeCompatibleBlock
NOTE: This transaction type only supports the format of the Ethereum transaction type. Unlike EIP-2930, there are no benefits in terms of transaction fee from using access list.
속성
속성
타입
설명
형식
uint8 (Go)
The type of TxTypeEthereumAccessList that is a concatenation of EthereumTxTypeEnvelope and EthereumTransactionType. This must be 0x7801.
chainId
*big.Int (Go)
The destination chain ID.
논스
uint64 (Go)
발신자의 트랜잭션을 고유하게 식별하기 위해 사용되는 값입니다. 발신자가 동일한 논스를 가진 두 개의 트랜잭션을 생성하면 하나만 실행됩니다.
가스 가격
*big.Int (Go)
발신자가 얼마나 가스비를 지급해야하는지 알 수 있도록 곱하는 값입니다. 발신자가 지급해야할 비용은 gas * gasPrice로 계산됩니다. 예를 들어, 만약 가스가 10이 필요하고 gasPrice가 10^18이라면 발신자는 트랜잭션을 위해 10 KLAY를 지급해야 합니다. See [Unit of KLAY].
gas
uint64 (Go)
트랜잭션에서 사용하도록 허락된 최대 트랜잭션 수수료입니다.
to
*common.Address (Go)
전송되는 KLAY를 받을 계정 주소입니다.
value
*big.Int (Go)
명시된 양의 KLAY(단위: peb)가 전송됩니다.
데이터
[]byte (Go)
트랜잭션 실행에 이용되며 트랜잭션에 첨부되는 데이터입니다.
accessList
type.AccessList (Go)
A list of addresses and storage keys consisting of [](common.Address, []common.Hash).
v, r, s
*big.Int (Go)
수신자가 발신자의 주소를 받을 수 있게 발신자에 의해 발생된 암호학적 서명입니다.
서명 RLP 인코딩
To make a signature for this transaction type, the RLP serialization proceeds as follows:
NOTE: This type of transaction should be signed with London Signer
SigRLP = EthereumTransactionType || encode([chainId, nonce, gasPrice, gasLimit, to, value, data, accessList])
SigHash = keccak256(SigRLP)
Signature = sign(SigHash, <private key>)
SenderTxHash를 위한 RLP 인코딩
To obtain SenderTxHash for this transaction type, the RLP serialization proceeds as follows:
SenderTxHashRLP = EthereumTransactionType || encode([chainId, nonce, gasPrice, gasLimit, to, value, data, accessList, v, r, s])
SenderTxHash = keccak256(SenderTxHashRLP)
Signature = sign(SenderTxHash, <private key>)
트랜잭션 해시를 위한 RLP 인코딩
To make a transaction hash, the RLP serialization proceeds as follows:
TxHashRLP = EthereumTransactionType || encode([chainId, nonce, gasPrice, gasLimit, to, value, data, accessList, v, r, s])
TxHash = keccak256(TxHashRLP)
Raw Transaction
RawTx = EthereumTxTypeEnvelope || EthereumTransactionType || encode([chainId, nonce, gasPrice, gasLimit, to, value, data, accessList, v, r, s])
RLP 인코딩 (예시)
The following shows the result of the RLP serialization and the transaction object:
    TX(3a3ab67168de40b1f8a2141a70a4e2f551f90d7814b2fbcb3ac99ad8d8d0b641)
    Contract: false
    Chaind:   0x2
    From:     a94f5374fce5edbc8e2a8697c15331677e6ebf0b
    To:       7b65b75d204abed71587c9e519a89277766ee1d0
    Nonce:    1234
    GasPrice: 0x19
    GasLimit  0xf4240
    Value:    0xa
    Data:     0x31323334
    AccessList: [{0000000000000000000000000000000000000001 [0000000000000000000000000000000000000000000000000000000000000000]}]
    V:        0x1
    R:        0xbfc80a874c43b71b67c68fa5927d1443407f31aef4ec6369bbecdb76fc39b0c0
    S:        0x193e62c1dd63905aee7073958675dcb45d78c716a9a286b54a496e82cb762f26
    Hex:      7801f8a1028204d219830f4240947b65b75d204abed71587c9e519a89277766ee1d00a8431323334f838f7940000000000000000000000000000000000000001e1a0000000000000000000000000000000000000000000000000000000000000000001a0bfc80a874c43b71b67c68fa5927d1443407f31aef4ec6369bbecdb76fc39b0c0a0193e62c1dd63905aee7073958675dcb45d78c716a9a286b54a496e82cb762f26
​
RPC Output (예시)
다음은 JSON RPC를 통해 반환된 트랜잭션 오브젝트를 보여줍니다.
The return of eth_getTransactionByHash
{
  "blockHash": "0x7bd7e8a92ecaa5781a15a8b6fff589f8ac8a79325b517a1ba5d5f2f3d7af1b00",
  "blockNumber": "0x1c8f4b",
  "from": "0x5618e15ec2916bbe6cf2cce20ce31e61d6062cac",
  "gas": "0x174876e800",
  "gasPrice": "0x5d21dba00",
  "hash": "0x3f67e48c2090f560234f555cd4edf7853b6327aa9a6a795be1efe3f360dac118",
  "input": "0x1122",
  "nonce": "0x11",
  "to": "0x5dce87b5bfcde54023811b168dc97a9f10913957",
  "transactionIndex": "0x0",
  "value": "0x186a0",
  "type": "0x1",
  "accessList": [
      {
          "address": "0x0000000000000000000000000000000000000001",
          "storageKeys": [
              "0x0000000000000000000000000000000000000000000000000000000000000000"
          ]
      }
  ],
  "chainId": "0x2710",
  "v": "0x1",
  "r": "0xebb2d2144293c257e27aaa1d22156f322b0d2d7385257f186c117899d791f174",
  "s": "0x5cea970287c9f0f9754050a552c458c066d8f3b3e4639f561b22ce4cb7553ac0"
}
The return of klay_getTransactionByHash
{
  "accessList": [
      {
          "address": "0x0000000000000000000000000000000000000001",
          "storageKeys": [
              "0x0000000000000000000000000000000000000000000000000000000000000000"
          ]
      }
  ],
  "blockHash": "0x7bd7e8a92ecaa5781a15a8b6fff589f8ac8a79325b517a1ba5d5f2f3d7af1b00",
  "blockNumber": "0x1c8f4b",
  "chainID": "0x2710",
  "from": "0x5618e15ec2916bbe6cf2cce20ce31e61d6062cac",
  "gas": "0x174876e800",
  "gasPrice": "0x5d21dba00",
  "hash": "0x3f67e48c2090f560234f555cd4edf7853b6327aa9a6a795be1efe3f360dac118",
  "input": "0x1122",
  "nonce": "0x11",
  "senderTxHash": "0x3f67e48c2090f560234f555cd4edf7853b6327aa9a6a795be1efe3f360dac118",
  "signatures": [
      {
          "V": "0x1",
          "R": "0xebb2d2144293c257e27aaa1d22156f322b0d2d7385257f186c117899d791f174",
          "S": "0x5cea970287c9f0f9754050a552c458c066d8f3b3e4639f561b22ce4cb7553ac0"
      }
  ],
  "to": "0x5dce87b5bfcde54023811b168dc97a9f10913957",
  "transactionIndex": "0x0",
  "type": "TxTypeEthereumAccessList",
  "typeInt": 30721,
  "value": "0x186a0"
}
TxTypeEthereumDynamicFee
TxTypeEthereumDynamicFee represents a type of Ethereum transaction specified in EIP-1559. This transaction type contains gasTipCap and gasFeeCap instead of gasPrice. Since this transaction type exists to support compatibility, it only works with EOAs associated with [AccountKeyLegacy]. EOAs associated with other account key types should use other transaction types such as TxTypeValueTransfer, TxTypeSmartContractExecution, and so on. This type of transaction can create accouns, transfer tokens, deploy/execute smart contracts, or a mix of the aforementioned.
NOTE: Klaytn networks can process this transaction type after the EthTxTypeCompatibleBlock
NOTE: Currently, this type of transaction only supports the format of the Ethereum transaction type. Unlike EIP-2930, there are no benefits in terms of transaction fees from using access list.
NOTE: Since Klaytn has a fixed gas price, gasTipCap and gasFeeCap should take the gas price for the respective network, which is 250 ston at the time of writing.
속성
속성
타입
설명
형식
uint8 (Go)
The type of TxTypeEthereumDynamicFee that is a concatenation of EthereumTxTypeEnvelope and EthereumTransactionType. It must be 0x7802.
chainId
*big.Int (Go)
The destination chain ID.
논스
uint64 (Go)
발신자의 트랜잭션을 고유하게 식별하기 위해 사용되는 값입니다. 발신자가 동일한 논스를 가진 두 개의 트랜잭션을 생성하면 하나만 실행됩니다.
gasTipCap
*big.Int (Go)
A multiplier to get how much the sender will pay in addition to baseFee. Since Klaytn has a fixed gas price, gasTipCap and gasFeeCap should take the gas price for the respective network, which is 250 ston at the time of writing.
gasFeeCap
*big.Int (Go)
발신자가 얼마나 가스비를 지급해야하는지 알 수 있도록 곱하는 값입니다. The amount of tokens the sender will pay is calculated via gas * gasFeeCap. Since Klaytn has a fixed gas price, gasTipCap and gasFeeCap should take the gas price for the respective network, which is 250 ston at the time of writing.
gas
uint64 (Go)
트랜잭션에서 사용하도록 허락된 최대 트랜잭션 수수료입니다.
to
*common.Address (Go)
전송되는 KLAY를 받을 계정 주소입니다.
value
*big.Int (Go)
명시된 양의 KLAY(단위: peb)가 전송됩니다.
데이터
[]byte (Go)
트랜잭션 실행에 이용되며 트랜잭션에 첨부되는 데이터입니다.
accessList
type.AccessList (Go)
A list of addresses and storage keys consisting of [](common.Address, []common.Hash).
v, r, s
*big.Int (Go)
수신자가 발신자의 주소를 받을 수 있게 발신자에 의해 발생된 암호학적 서명입니다.
서명 RLP 인코딩
To make a signature for this transaction type, the RLP serialization proceeds as follows:
NOTE: This type of transaction should be signed with London Signer
SigRLP = EthereumTransactionType || encode([chainId, nonce, gasTipCap, gasFeeCap, gasLimit, to, value, data, accessList])
SigHash = keccak256(SigRLP)
Signature = sign(SigHash, <private key>)
SenderTxHash를 위한 RLP 인코딩
To obtain SenderTxHash for this transaction type, the RLP serialization proceeds as follows:
SenderTxHashRLP = EthereumTransactionType || encode([chainId, nonce, gasTipCap, gasFeeCap, gasLimit, to, value, data, accessList, v, r, s])
SenderTxHash = keccak256(SenderTxHashRLP)
Signature = sign(SenderTxHash, <private key>)
트랜잭션 해시를 위한 RLP 인코딩
To obtain a transaction hash, the RLP serialization proceeds as follows:
TxHashRLP = EthereumTransactionType || encode([chainId, nonce, gasTipCap, gasFeeCap, gasLimit, to, value, data, accessList, v, r, s])
TxHash = keccak256(TxHashRLP)
Raw Transaction
RawTx = EthereumTxTypeEnvelope || EthereumTransactionType || encode([chainId, nonce, gasTipCap, gasFeeCap, gasLimit, to, value, data, accessList, v, r, s])
RLP 인코딩 (예시)
The following shows the result of the RLP serialization and the transaction object:
    TX(be74e122acf00c2f257e8698ecf01140b58b2880de3f24d0875730425eccb45a)
    Contract: false
    Chaind:   0x2
    From:     a94f5374fce5edbc8e2a8697c15331677e6ebf0b
    To:       7b65b75d204abed71587c9e519a89277766ee1d0
    Nonce:    1234
    GasTipCap: 0x19
    GasFeeCap: 0x19
    GasLimit  0xf4240
    Value:    0xa
    Data:     0x31323334
    AccessList: [{0000000000000000000000000000000000000001 [0000000000000000000000000000000000000000000000000000000000000000]}]
    V:        0x0
    R:        0xca14aa0bada2da7ca1b143c16e2dd4a69f2a1e77ce54c7f6d440fe828a777f4f
    S:        0x117f0f78aed398b2995b5ee7c67ace25d52be3c72c1384c2aaa9683b351556
    Hex:      7802f8a1028204d21919830f4240947b65b75d204abed71587c9e519a89277766ee1d00a8431323334f838f7940000000000000000000000000000000000000001e1a0000000000000000000000000000000000000000000000000000000000000000080a0ca14aa0bada2da7ca1b143c16e2dd4a69f2a1e77ce54c7f6d440fe828a777f4f9f117f0f78aed398b2995b5ee7c67ace25d52be3c72c1384c2aaa9683b351556
RPC Output (예시)
다음은 JSON RPC를 통해 반환된 트랜잭션 오브젝트를 보여줍니다.
The return of eth_getTransactionByHash
{
  "blockHash": "0x55792fe186e3d1515fe35a68c2c8d7977b2d7db184d80526f906c53222b77833",
  "blockNumber": "0x1c944d",
  "from": "0x5618e15ec2916bbe6cf2cce20ce31e61d6062cac",
  "gas": "0x174876e800",
  "gasPrice": "0x5d21dba00",
  "maxFeePerGas": "0x5d21dba00",
  "maxPriorityFeePerGas": "0x5d21dba00",
  "hash": "0x5db239963029ad9ef6c3331b10ae455638316e330b0efdae2cc1f8e86884e66e",
  "input": "0x1122",
  "nonce": "0x13",
  "to": "0xa0f1633f4c666d7fe5ba912bd5caf03d3655ac31",
  "transactionIndex": "0x0",
  "value": "0x186a0",
  "type": "0x2",
  "accessList": [
      {
          "address": "0x0000000000000000000000000000000000000001",
          "storageKeys": [
              "0x0000000000000000000000000000000000000000000000000000000000000000"
          ]
      }
  ],
  "chainId": "0x2710",
  "v": "0x1",
  "r": "0x27e007cbe79fd8cc9b89dd798bdd5aa62d038273bf006c7c3b40e13a938ab807",
  "s": "0x6209bb328855f02fa2671fecb41efd9f191b03ecab5e580227fa2a0674879384"
}
The return of klay_getTransactionByHash
{
  "accessList": [
      {
          "address": "0x0000000000000000000000000000000000000001",
          "storageKeys": [
              "0x0000000000000000000000000000000000000000000000000000000000000000"
          ]
      }
  ],
  "blockHash": "0x55792fe186e3d1515fe35a68c2c8d7977b2d7db184d80526f906c53222b77833",
  "blockNumber": "0x1c944d",
  "chainId": "0x2710",
  "from": "0x5618e15ec2916bbe6cf2cce20ce31e61d6062cac",
  "gas": "0x174876e800",
  "hash": "0x5db239963029ad9ef6c3331b10ae455638316e330b0efdae2cc1f8e86884e66e",
  "input": "0x1122",
  "maxFeePerGas": "0x5d21dba00",
  "maxPriorityFeePerGas": "0x5d21dba00",
  "nonce": "0x13",
  "senderTxHash": "0x5db239963029ad9ef6c3331b10ae455638316e330b0efdae2cc1f8e86884e66e",
  "signatures": [
      {
          "V": "0x1",
          "R": "0x27e007cbe79fd8cc9b89dd798bdd5aa62d038273bf006c7c3b40e13a938ab807",
          "S": "0x6209bb328855f02fa2671fecb41efd9f191b03ecab5e580227fa2a0674879384"
      }
  ],
  "to": "0xa0f1633f4c666d7fe5ba912bd5caf03d3655ac31",
  "transactionIndex": "0x0",
  "type": "TxTypeEthereumDynamicFee",
  "typeInt": 30722,
  "value": "0x186a0"
}

속성	타입	설명
형식	uint8 (Go)	The type of `TxTypeEthereumAccessList` that is a concatenation of `EthereumTxTypeEnvelope` and `EthereumTransactionType`. This must be 0x7801.
chainId	*big.Int (Go)	The destination chain ID.
논스	uint64 (Go)	발신자의 트랜잭션을 고유하게 식별하기 위해 사용되는 값입니다. 발신자가 동일한 논스를 가진 두 개의 트랜잭션을 생성하면 하나만 실행됩니다.
가스 가격	*big.Int (Go)	발신자가 얼마나 가스비를 지급해야하는지 알 수 있도록 곱하는 값입니다. 발신자가 지급해야할 비용은 `gas` * `gasPrice`로 계산됩니다. 예를 들어, 만약 가스가 10이 필요하고 gasPrice가 10^18이라면 발신자는 트랜잭션을 위해 10 KLAY를 지급해야 합니다. See [Unit of KLAY].
gas	uint64 (Go)	트랜잭션에서 사용하도록 허락된 최대 트랜잭션 수수료입니다.
to	*common.Address (Go)	전송되는 KLAY를 받을 계정 주소입니다.
value	*big.Int (Go)	명시된 양의 KLAY(단위: peb)가 전송됩니다.
데이터	[]byte (Go)	트랜잭션 실행에 이용되며 트랜잭션에 첨부되는 데이터입니다.
accessList	type.AccessList (Go)	A list of addresses and storage keys consisting of [](common.Address, []common.Hash).
v, r, s	*big.Int (Go)	수신자가 발신자의 주소를 받을 수 있게 발신자에 의해 발생된 암호학적 서명입니다.

속성	타입	설명
형식	uint8 (Go)	The type of `TxTypeEthereumDynamicFee` that is a concatenation of `EthereumTxTypeEnvelope` and `EthereumTransactionType`. It must be `0x7802`.
chainId	*big.Int (Go)	The destination chain ID.
논스	uint64 (Go)	발신자의 트랜잭션을 고유하게 식별하기 위해 사용되는 값입니다. 발신자가 동일한 논스를 가진 두 개의 트랜잭션을 생성하면 하나만 실행됩니다.
gasTipCap	*big.Int (Go)	A multiplier to get how much the sender will pay in addition to `baseFee`. Since Klaytn has a fixed gas price, `gasTipCap` and `gasFeeCap` should take the gas price for the respective network, which is 250 ston at the time of writing.
gasFeeCap	*big.Int (Go)	발신자가 얼마나 가스비를 지급해야하는지 알 수 있도록 곱하는 값입니다. The amount of tokens the sender will pay is calculated via `gas` * `gasFeeCap`. Since Klaytn has a fixed gas price, `gasTipCap` and `gasFeeCap` should take the gas price for the respective network, which is 250 ston at the time of writing.
gas	uint64 (Go)	트랜잭션에서 사용하도록 허락된 최대 트랜잭션 수수료입니다.
to	*common.Address (Go)	전송되는 KLAY를 받을 계정 주소입니다.
value	*big.Int (Go)	명시된 양의 KLAY(단위: peb)가 전송됩니다.
데이터	[]byte (Go)	트랜잭션 실행에 이용되며 트랜잭션에 첨부되는 데이터입니다.
accessList	type.AccessList (Go)	A list of addresses and storage keys consisting of [](common.Address, []common.Hash).
v, r, s	*big.Int (Go)	수신자가 발신자의 주소를 받을 수 있게 발신자에 의해 발생된 암호학적 서명입니다.

수수료 부분 위임 트랜잭션

연산

Last modified 9mo ago